Modern offset presses are equipped with motorised circumferential lateral and axial register controls. Continuous use of the axial register control will cause premature wear to your press cylinder bearings and journals leading to print quality problems.

REGISTAR series TY-500 with built-in plate bender system can achieve plate-to-plate register before mounting the plates onto your press and avoid causing damage to your heavy investment. Perfect print register on your press will be obtained in the shortest time.

• CCD camera enabling 30X magnification of print register marks for easy visual inspection
• Sequential computer controlled system for:
  • automatic vacuum hold down of plate
  • automatic search of register marks & positioning of plate
  • automatic punching by pneumatic action
  • automatic bending of plates (where required)
    
• Can handle punching and bending of plates for up to 3 different press models
• Colour monitor with touch screen controls
• Accept all offset plates up to size IV width
• Electrical equipment according to your local specifications

REGISTAR TY-500 is specially designed for use with all makes of sheet-fed offset presses including Heidelberg, MAN-Roland, KBA, Mitsubishi, Komori, Akiyama, Ryobi, Hamada, and other offset printing presses. The system requires minimum maintenance and will ensure:

• Increase in efficiency
• Reduction in make-ready wastage
• Zero plate re-makes due to zero plate punching and/or plate bending (where required) registration errors